How to Watch Satellite TV Online Without Any Satellite Dish

Anyone can watch satellite TV online without any satellite dish system nowdays. In case you do not know, this article would show you one time-tested and another new revolutionary way to watch satellite TV on the internet without having to set up a satellite dish.

Many of the older generation grew up in an era of satellite dishes, especially for those who live in the rural areas where cable do not exist. The dishes are transmitters and together with receivers are conduits for TV signals to be displayed as visual images and pictures on our TV screens. However, they are not always pleasant. Set up can be tough and definitely not for those who are not good with their hands or have poor technical skills. Satellite dishes have grown smaller in recent years but they used to be larger than 6 foot monsters in earlier days. If that irks you, you would be relieved to know that you can watch satellite TV online just like many others without satellite dish system.

What are the hardware and PC requirements you need to set up your 'satellite-dish less' PC satellite online TV?

1. A Good PCTV Card

A PCTV card can be installed onto your computer to make your computer work like a satellite television set. Such cards come in the form of internal or external hardware. If you are familiar with the inside of a computer, then an internal card could be a good choice since they tend to be cheaper and more affordable. However, do not bother yourself when you find it too troublesome to fix it internally because there are external cards that work more like plug-and-play gadgets. They cost more and can set you back easily by a few hundreds. As long as your PC has a spare USB port, this option to watch satellite TV online is open to you.

2. PC Requirements

I would suggest you check your systems configuration before you start shopping for a PCTV card. Most cards require a minimum Pentium 3 333MHz system to run well but remember to note down the specifications like RAM, hard disk space, Operating System, etc before you head to the stores.

3. Ready Internet Connection

PCTV cards work well with both dial-up and broadband connections. However, I have a word of advice here. Dial-up transmission runs like a snail and is a really serious party spoiler. You can end up more frustrated than glad that you are watching the program. Go for broadband connection if you can afford to.

Okay, now that we have discussed about the older commonly accepted method to watch satellite TV online, we will look at another new revolutionary technique. This requires the usage of PC satellite TV software which can be downloaded easily. The setup is simple and all it takes is downloading the software and clicking a few buttons before you are ready to watch satellite TV online from more than 3000 channels. Awesome is not it?

For more information on this PC satellite TV software, do a read up at my satellite TV blog.

This article may be freely reprinted or distributed in its entity in any ezine, newsletter, blog or website. The author's name, bio and website links must remain intact and be included with every reproduction.

Posted in general | Comments Off on How to Watch Satellite TV Online Without Any Satellite Dish

The Importance of Educational Software in Educational Institutes

Internet has expanded its dimensions like anything. The incredible expansion of the web world along with its easy and affordability of integrated technology have come together to create a new learning methodology of Educational Software. Nowadays, the task of carrying out educational projects and disseminating education is not at all futuristic or alien. This have not only become an important part of the educational setup but also of the business world. The facility to link with the internet in a reasonably priced and competent manner was the basic reason for this tremendous growth of this. Nowadays, education software available in comprehensive package forms for colleges, schools, Universities and even home use.

With time, educational institutions have become more diverse and therefore they cannot risk being simple temples of education. There are vast varieties of activities in educational institutes like admissions, curriculum management, library management, placements, hostel management, finance management and a number of other requirements. It is in view of these burgeoning requirements of schools and higher educational institutions that Educational Software have become popular nowadays. This software can address all the requirements of an educational institute starting from student curriculum management to school bus tracking system to Biometric Attendance System to Student Information System to Library Automation Systems.

Education Software is nowadays constituents of a school’s identity as they are capable of delivering all the associated tasks. Present day software even provides the facility and access to parents to keep a bird’s view of their kid’s progress in the classroom. The Student Information System enables parents to monitor the curriculum of their children and receive feedbacks from the teachers. Intelligent Library Management System allows easy access to library records.

Another aspect of education software is their Bus Tracking System that ensures the safety of students. It is a path breaking integration into this software. Nowadays, they have become quite affordable integrating advanced GPS applications into the software. They are effective tools for the school management as well as the parents, who want to know whether their students or kids are safe while travelling from school to home and vice versa.

The curriculum management component of this is capable giving an interactive learning experience to students. Nowadays, most of the education software is capable of developing to the next level as and when students grow in their knowledge. Online tests and evaluations have become important tools used by such software in order to test the level of students. It can even take the form of a game in order to stimulate the mind of children giving them real demonstrations of subject matter. Educational Software can now be found for students of all ages and for all subjects.

Posted in general | Comments Off on The Importance of Educational Software in Educational Institutes

Advantages of Antispyware Programs

Much like the antivirus programs, now a days anti spyware programs also is a must if you are browsing the net. Most of the antivirus programs provide a good job by taking care of the computer viruses. However, many of them fail to detect the spyware which gets installed onto the PC when connected to the internet. This is where Anti spyware programs comes to help. They do a good job by protecting our computers by identifying the spyware and promptly remove them.

There are so many antispyware programs are available in the market. Both in the Online as well as near to your computer retail showroom. However, you have to ensure that you buy a good Anti spyware program which fulfills the requirements what it promises. Also, make sure to check that the software works on your Operating System. Most of them work on Windows Operating system; however, there is no harm in double checking the same.

Some of the characteristics of a good antispyware program is as below.

Real time scanning

Real time scanning is the heart of these type of programs. The program once installed should reside on your system tray and should be able to do a real time scan in the background. This way it should be able to identify all kinds of threats like Adware, spyware, Trojans and the harmful key loggers.

Automatic Updates

There is no point in having an Antispyware software program which does not update the spyware definitions automatically and at periodic intervals.

Customer Support

Most of the time you will not be require to call up their helpdesk as the software will work automatically provided if the operating system is compatible and all the installation prerequisites are met. However, if you run across any installation problems or some kind of bugs customer service comes in handy.

Posted in general | Comments Off on Advantages of Antispyware Programs

Strengths and Weaknesses of Waterfall Approach for Software Development

One of the most famous and widely used approaches for software development is the waterfall model. Waterfall approach is an old technique that has been in use for quite some time, but in modern times agile approach is gaining prominence.

Waterfall approach, as is evident from the name, refers to a systematic approach where one step comes after the other. It cannot go the other way round. The process works like the waterfall effect that flows in one direction, which is from up to down.

In this process the life cycle of the development process is predetermined. All the steps are defined before the start of the project. The approach is predictive, where the team is well aware of the order of each step and therefore works accordingly. It starts from the requirement analysis, the design phase and then proceeds on to the implementation, testing and the maintenance phases.

The waterfall approach can be quite beneficial for those who are quite clear on their requirements. A planned approach works for them because they want fixed processes and budget. Where fixed processes are beneficial, at the same time they can be inconvenient at times. In cases where the client is not clear on the requirements and finds in the middle of the project that he/she wants to change course, this approach can prove to be quite problematic.

Another point of the waterfall approach is that the requirement analysis and design of architectural structure can consume a lot of time. Extensive research is done initially as the next phases depend completely on the planning strategy. However, the good thing is that everything is thoroughly worked out and each aspect is studied beforehand. The developers in such cases know what is expected of them.

A waterfall approach works in a systematic order, with one step following the other and the testing phase comes in the end. If there are any big problems encountered in the testing phase, it means a long process to make the amends. The process can consume extra time and money.

We cannot conclude that one approach is better than the other, as every method would have its own strengths and weaknesses. The determination of success for each method depends on how it is being used and whether the approach suits the scope of work being undertaken. While one approach may be suitable for a particular project, it might become totally useless under different circumstances. For example, some believe that agile methods are not well suited for offshore development, as they require a closer contact and communication that is not possible in an offshore project.

Posted in general | Comments Off on Strengths and Weaknesses of Waterfall Approach for Software Development

What Requirements Does a Dot Net Developer Need to Fulfill?

Microsoft Dot Net is a useful software development component. It provides tools and libraries to the software developers so that they can create Windows-based applications in a more efficient manner. A Dot Net developer is a software programmer who has specific skills using .Net to develop software and computer applications. For people who are in the midst of looking for developers for your projects, there are some areas you need to take note. You are advised to look for competent programmers who can really assist you to complete your tasks successfully.

First thing first, you need to be clear about the responsibilities of a .Net Developer before you start looking for suitable candidate. Seriously speaking, the programmer is required to:

• Work hand in hand with other software engineers and architects to develop a logical series of instructions referred to as programming code for the computer to communicate with the networks, applications and databases.

• Create new software applications to suit the business needs

• Modify, repair, test and enhance existing applications

After knowing what the developer is required to do, the next area we need to take into consideration is the academic qualification. In general, a programmer should have degree qualification in computer science, information technology or any related discipline. If the programmer is not a degree holder, you may take a look at his or her working experience. If the candidate has extensive experience dealing with .Net development tools, you can consider getting him or her in. Check with the candidate whether he or she is familiar with maintenance of ASP Applications, e-Commerce solution, online education and learning, social networking sites, corporate web applications, and so on.

At the same time, a good dot net developer must be competent in carrying out all the important tasks. It is a must for him or her to have the following skills in:

• Classic ASP

• Microsoft SQL 2000 / 2005

• MS Access

• JavaScript, XML, DHTML, AJAX and CSS

• VBScript and JScript

Frankly speaking, if the programmer does not have the above mentioned skills, most of the employers in the job market are not willing to hire him or her.

Besides the skills, we should also take serious consideration on the general qualities of the programmers. They should have qualities as follow:

• Good passion in work

Having great interest in work is important. The programmers should love and enjoy what they are doing.

• Good learning attitude

Learning is a continuous process. We can’t stop at certain stage. Good developers must have positive attitude in learning. They must always grab the opportunities to learn new technology so that good applications can be adapted.

• Some “intelligence”

Honestly speaking, intelligence is something very subjective. What I mean here is the “personality” of the person. Being a programmer, he or she must be smart and sensitive to respond to all changes. It is important for a programmer to be open-minded and willing to take new challenges from time to time.

Posted in general | Comments Off on What Requirements Does a Dot Net Developer Need to Fulfill?

Website Design – Hardware and Software Tools You May Need

Before you get started with your new website or editing your current site, you need to consider which hardware and software tools you may need to support your efforts.

When it comes to hardware needed this can be very simple or reasonably complex depending on your particular needs. Of course, if you plan to create a new website (or even view your new website later) you need a computer. Simple enough, right? Not necessarily. We prefer to work with Apple Macintosh (OSX Leopard on MacBook Pro) as we do a lot of intensive graphics work and have previously invested in Adobe Creative Suite software (Photoshop, InDesign, Flash, Dreamweaver, etc.). It is just as easy to create your new website using your Windows PC but we would suggest you stay away from using Windows Vista (any version) and migrate to Windows 7 or stick with Windows XP. These operating systems are just much more stable and reliable.

Another consideration for hardware should be some sort of backup hard drive or removable USB memory stick(s). It is important that you back up all of your website data to a removable drive in the event your computer crashes, is broken or is stolen. When you create website files, most of your data will be stored on the website hosting servers but, in many cases, you will have many other “builder files” that usually never make it to the hosting servers. If you lose this data you will be forced to start from scratch in many cases. Another piece of hardware that many forget about is a HD Video Camcorder. If you plan to include video on your site, you should be investing in something half decent; you can normally pick up a good video camera that also captures “still photos” for under $500.00.

When it comes to software needed, this can be somewhat more complicated, again depending on what your website design goals are. At the very least, you will need some sort of text editing software, FTP (file transfer software), graphics creation software and then a variety of other tools as you progress.

Here are some of the most common subjects you should consider when planning the design of your website product.

COMPUTER

Do you currently have a computer that can process large files (i.e. – video files) quickly and efficiently?

WEBSITE SERVER

Are you planning to host your own website portal? If so, do you know what type of hardware and server software you will need?

BACKUP HARD DRIVE or USB STICK

Do you currently have some sort of backup hard drive equipment or plan?

VIDEO CAMERA

Will you be creating custom videos for your website and, if so, do you have a HD video camera ready to go?

MOBILE WEB DEVICES

Are you planning to make your website “mobile web friendly”? If so, do you have an iPhone and an iPad? Android phone? Blackberry device? These will be needed for testing purposes!

WEBSITE CREATION SOFTWARE

Do you have any website creation software (i.e. – Adobe Dreamweaver or Microsoft Front Page) installed, licensed and ready to use?

GRAPHICS EDITING SOFTWARE

Are you planning to create your own website graphics or edit pictures? Do you have the necessary software (i.e. – Adobe Photoshop or Photo Studio)?

DATABASES

Are you planning on creating a database for your website and, if so, do you know which software to use for this purpose?

Posted in general | Comments Off on Website Design – Hardware and Software Tools You May Need

How to Change the MPI Node Address For a Siemens S7-300 PLC

I have seven Siemens S7-300 PLCs connected together using the MPI (Multi Point Interface) interface. The Siemens MPI protocol is used by Siemens PLCs to communicate with external devices. I want to rename each of the seven PLCs. Here are the steps to accomplish that task.

First, connect your MPI cable to the first PLC. I will be connecting my laptop to each PLC individually. Power up the PLC and open Simatic Manager. The "New Project" Wizard window will open. Just click Cancel to close the window. Now click the Accessible Nodes icon on the toolbar. A window will open showing the identification of the PLC you are connected to. My window is showing MPI = 2 (directly). Make a note of this address and close the window.

Next we need to download a hardware configuration to the PLC. This is where we will rename the PLC node address. There are probably a couple of different ways to do this – following is how I accomplish this. All seven of my PLCs are the same model; Therefore, I am using the same hardware configuration. For the obvious reasons, I want to give each a different MPI node address. I have a project file that contains all seven of my PLC programs and one hardware configuration file. I open the one hardware configuration file, and then double click Hardware in the right hand window. This will open the HW Configuration window. In this window you should see your PLC with its MPI address given.

Remember when we clicked the Accessible Nodes icon and saw MPI = 2 (directly)? My Hardware Configuration Window is showing a MPI address of 7. Place your mouse cursor on the 7 and double click. Your CPU Properties window will open. It should open to the General tab. Look down and you will see Interface Type MPI with an address of 7. Click Properties and the MPI interface Properties window will open. Using the pull down menu, choose your MPI node address and make sure the MPI (1) 187.5kbps is highlighted and click OK. You are now back on the CPU Properties window where you will see your address has changed. Click OK and you will go back to the Hard Ware window where you can verify your MPI node address has changed.

You will now click the Save and Compile icon and then click the download icon. The Select Target Module window will open. Click OK and the Select Node Address window will open. Here you will see the MPI node address you assigned earlier. You will need to click the View button right below this. You will see the current node address appear, this should be the same as what you saw earlier when you clicked the Accessible Nodes icon. Simply click on this number and you will see it appear in the MPI address slot under the Enter connection to target station. Click OK and the Download to Module window will open. Click OK and the Stop Target Modules window will open. Click OK and the "Do you want to start the module?" Window will open. Click Yes.

Now go back to the SIMATIC Manager window and click the accessible nodes icon. You will see your new MPI node address. You can see this same article with pictures at http://www.morerobototics.com .

Posted in general | Comments Off on How to Change the MPI Node Address For a Siemens S7-300 PLC

Advantages and Disadvantages of Biometric Time and Attendance Software

First of all let me ask you what you understand by time and attendance software? Have you ever been asked to log in as soon as you enter office and the main gate of the office has a Biometric machine that takes in your finger prints and allows you to enter the office premise? Yes, these are the time and attendance software being installed in a company.

Biometrics consists of methods for uniquely identifying a person (human being) by his/her physical or behavioral traits. There are many biometric software available in market for such purpose and their use is widely known. One such use is Biometric time and attendance management software.

Those days are gone when we had to punch in cards or sign into a register to tell the other person that we are present. Just as paper checking has been changed from manual to computerized, identifying a person and letting him in your office has been changed from manual to biometrics.

There are many benefits of having such methodology in your office. Such as:

• Accurate timing: When a person looks at his watch and enters the time there is a slight chance that he may see the wrong timing and write. Whereas with biometric time and attendance software there is no possibility of such mistake. The user does not need to see or check the time, it automatically gets logged in.

• Less error: There is no scope of human error here.

• Profit to company: If it’s accurate and correct the company will definitely gain from it.

As everything has a good and bad side this too has its disadvantages, such as:

• Extra cost to company: Biometric software and machine cost a lot more, so installing such software need a good investment money wise.

• Extra management: Remember when every employee is logging his own timing when he comes or leaves; there is no extra management here. But, if you are putting a machine there has to be taken some care of it.

Biometrics time and management software is really helpful when creating payrolls for employees. Once a definite timing has been registered you don’t need to think twice before creating the employees pay.

Many homes are also using such kind of software to have a safe and secure home. Biometric software is really helpful when you need security in your home as well as in office. There are many companies all over the world providing such biometric time and attendance software. You just need to keep an eye on the technologies and websites that are providing you these.

Posted in general | Comments Off on Advantages and Disadvantages of Biometric Time and Attendance Software

Wide Area Network (WAN)

Types and Characteristics of WANs

What is a WAN?

There are two prevailing definitions of a Wide Area Network (WAN). The book definition of a WAN is a network that spans large geographical locations, typically to interconnect multiple Local Area Networks (LANs). The practical definition of a WAN is a network that traverses a public network or commercial carrier, using one of several WAN technologies

What are its Main Components?

The main components for a WAN are routers, switches and modems. These components are described below in the hardware section.

CPE – Devices on the subscriber contracts are called customer premises equipment (CPE).
The subscriber owns the CPE or leases the CPE from the service provider. A copper or fiber cable connects the CPE to the service provider's nearest exchange or central office. This cabling is often called the local loop, or "last-mile".

DTE / DCE – Devices that put data on the local loop are called data circuit-terminating equipment, or data communications equipment (DCE). The customer devices that pass the data to the DCE are called data terminal equipment (DTE). The DCE primarily provides an interface for the DTE into the communication link on the WAN cloud.

Hardware

In a WAN you will need various types of hardware components for it to function. The typical items of hardware that you will need in a WAN are:

Router – An electronic device that connects a local area network (LAN) to a wide area network (WAN) and handles the task of routing messages between the two networks. Operates at layer 3, and makes decisions using IP addresses.

Switch – A switch is a network device that selects a path or circuit for sending a unit of data to its next destination. Operates at layer 2, and uses MAC addresses to send data to correct destination.

Modem – Short for modulator / demodulator, a modem that enables a computer to communicate with other computers over telephone lines. Operates at layer 1, where signals are converted from digital to analogue and vice versa for transmission and receiving.

Wan Standards

WANs operate within the OSI model using layer 1 and layer 2 levels. The data link layer and the physical layer. The physical layer protocols describe how to provide electrical, mechanical and functional connections to the services provided by the ISP. The data link layer defines how data is encapsulated for transmission to remote sites.

Encapsulation

Encapsulation is the wrapping of data in a particular protocol header. Remember that WANs operate at the physical layer and the data link layer of the osi model and that higher layer protocols such as IP are encapsulated when sent across the WAN link. Serial interfaces support a wide range of WAN encapsulation types, which must be manually specified. These types include SDLC, PPP, Frame delay etc. Regardless of WAN encapsulation used it must be identical on both sides of the point to point link.

Packet and Circuit Switching

Circuit switching and packet switching are both used in high-capacity networks.
The majority of switched networks today get data across the network
Through packet switching.

Circuit-switching is more reliable than packet-switching. Circuit switching is old and expensive, packet switching is more modern.

General Routing Issues

What is a Routing Protocol?

A routing protocol is a protocol that specifies how routers communicate and exchange information on a network. Each router has prior knowledge of its immediate neighbors and knows the structure of the network topology. The routers know this because the routing protocol shares this information.

Protocol

RIP (Routing Information Protocol) was one of the most commonly used protocols on internal networks. Routers use RIP to dynamically adapt changes to the network connections and communicate information about which networks routers can reach and the distance between them. RIP is sometimes said to stand for Rest in Pieces in reference to the reputation that RIP has for breaking unexpectedly and rendering a network unable to function.

Routing Algorithms

Distance Vector

This type of routing protocol requires that each router simply inform its neighbors of its routing table. The distance vector protocol is also known as the bellman-ford algorithm.

Link State

This type of routing protocol requires that each router maintain a partial map of the network. The link state algorithm is also know as Dijkstra's algorithm.

IGRP

IGRP is a type of distance vector routing protocol invented by cisco used to exchange routing data in a autonomous system. Distance vector protocols measure distances and compare routes. Routers that use distance vector must send all or a portion of their routing table in a routing update message at regular intervals to each neighbor router.

Addressing and Routing

What does routing mean?

Routing is the process of deciding how to move packets from one network to another.
The directions also known as routes can be learned by a router using a routing protocol then the information is passed from router to router along the route of the destination.

IP Address's

Every machine connected to the internet is assigned an IP address. An example of an IP address would be 192.168.0.1. IP addresses are displayed in decimal format to make it easier for humans to understand but computers communicate in binary form. The four numbers that separate an IP address are called Octets. Each position consists of eight bits. When added to together you get 32 ​​bit address. The purpose of each octet in an IP address is to create classes of IP addresses that can be assigned within a network. There are three main classes that we deal with Class A, B and C. The octets of an IP address are split into two parts Network and Host. In a class A address the first octet is the network portion, this determinates which network the computer belongs to, the last octets of the address are the hosts that belong to the network.

Sub netting

Sub netting allows you to create multiple networks within a class A, B or C address. The subnet address is the address used by your LAN. In a Class C network address you would have a subnet mask of 255.255.255.0. A subnet mask identifies which portion is network and which is host. For example 192.168.6.15 the first octet three octets are the Network address and the last octet being the host (Workstation). It is important to subnet a network because gateways need to forward packets to other LANS. By giving each NIC on the gateway an IP address and a Subnet mask it allows the gateways to route packets from LAN to LAN. Once the packet arrives at its destination, the gateway then uses the bits of the subnet portion of the IP address to decide which LAN to send the packets.

Circuit Switched Leased Lines

A circuit switched network is one that establishes a dedicated circuit (or channel) between nodes and terminals before the users may communicate. Here are some terminologies associated with a Circuit switched network.

Frame relay is a telecommunication service designed for cost-efficient data transmission between local area networks (LANs)

Basic rate interference is a service used by small business for internet connectivity. An ISDN BRI provides two 64 Kbps digital channels to the user.
Primary rate interface (PRI) is a telecommunications standard for carrying voice and data transmissions between two locations
All data and voice channels are ISDN and operate at 64kbit / s

Packet Switching

Http://www.raduniversity.com/networks/2004/PacketSwitching/main.htm – _Toc80455261

Packet switching refers to protocols in which messages are broken up into small packets before they are sent. Each packet is then transmitted over the Internet. At the destination the packages are reassembled into the original message. Packet switching main difference from Circuit Switching is that that the communication lines are not dedicated to passing messages from the source to the destination. In Packet Switching, different messages can use the same network resources within the same time period.

Http://en.wikipedia.org/wiki/Asynchronous_Transfer_Mode

Asynchronous Transfer Mode (ATM) is a cell relay, packet switching network and protocolwhich encodes data into small fixed-sized cells.

ISDN is used to carry voice, data, video and images across a telephone network. ISDN stands for integrated services Digital Network. Isdn also provides users with a 128kbps bandwidth. This is done through frame relay. Frame relay complements and provides a service between ISDN, which offers bandwidth at 128 Kbps and Asynchronous Transfer Mode which operates in somewhat similar fashion to frame relay but at speeds from 155.520 Mbps or 622.080 Mbps. Frame relay is based on the older X.25 packet switching technology and is used to transmit analogue signals such as telephone conversations.

PSDN stands for packet switched data network and is a data communication network. Packet switched networks do not establish a physical communication signal like the public telephone circuit (circuit switched network) Packets are sent on a fixed length basis and assigned with a source and a destination address. The packages then explicitly on the routers to read the address and route the packets through the network.

Mobile and Broadband Services

Digital Subscriber Line (DSL) is mainly used to bring high bandwidth connections to homes and small business's over a copper wire telephone line. This is can only be achieved if you stay within the range of the telephone exchange. DSL offers download rates of up to 6mbps allowing continuous transmission of video, audio and 3D effects. DSL is set to replace ISDN and compete with the cable modem in providing multimedia to homes. DSL works by connecting your telephone line to the telephone office over copper wires that are twisted together.

Asymmetric Digital Subscribers Line is most commonly used for home users. It provides a high download speed but a lower upload speed. Using ADSL, up to 6.1 megabits per second of data can be sent downstream and up to 640 Kbps upstream.

Http://en.wikipedia.org/wiki/Symmetric_Digital_Subscriber_Line

Symmetric Digital Subscriber Line is a digital subcriber line which runs over one pair of copper wires. The main difference between ADSL and SDSL is the difference in upload and download speeds. SDSL allows the same upstream data rate and downstream data rate as ADSL upstream can be very slow.

[Http://searchnetworking.techtarget.com/sDefinition/0],,sid7_gci558545,00.html

HDSL High bit-rate Digital Subscriber Line, one of the earliest forms of DSL, is used for wideband digital transmission within a corporate site and between the telephone company and a customer. The main characteristic of HDSL is that that provides equal bandwidth in both directions.

IDSL is a system in which data is transmitted at 128 Kbps on a regular copper telephone line from a user to a destination using digital transmission.

The Local Loop enables operators to connect directly to the consumer via copper local loops and then add their own equipment to offer broadband and other services. This process involves operators accessing local exchange buildings to connect to a network of copper lines which connect them to homes and businesses. BT is an Example of a Local Exchange. The local loop connecting the telephone exchange to most subscribers is capable of carrying frequencies well beyond the 3.4 kHz upper limit.

Benefits of using DSL

DSL can provide a virtual instantaneous transmission of voice, data and video over ordinary copper phone lines. A DSL connection can eliminate delays while waiting to download information and graphics from the Internet. It provides users with a cost effective high speed Internet connection. Another benefit is that a DSL connection is always on-line (like a LAN connection) with no waiting time for dialing or connecting.

There are now more than 10 million broadband connections in the UK. By December 2005 there were 9.792 million broadband connections in the UK and the average broadband take up rate during the three months to December was more than 70,000 per week.

Posted in general | Comments Off on Wide Area Network (WAN)

7 Benefits of the Doctor and Clinic Management System Software

A cloud-based clinic management system addresses your hospital management related woes. It brings simplicity to the patient appointments, their treatment, medical billing and payments and services that take care of other requirements of the hospital.

Advantages of a Cloud Compliant Software

A software that leverages the cloud technologies in full, offers flexibility, cost saving, fast service, ease of accessibility and sustainability.

Flexibility

Even small hospitals can harness the power of this type of software. As the business grows, the software automatically scales itself to the hospital’s increasing needs without the user having to provide for it. The software is easy use, at its fullest, right from the first day.

Cost Saving

Choosing to use clinic management software located on the cloud platform is cost effective for the hospitals. It is an attractive choice for the small as well as big hospital setups.

It requires no expenditure on hardware, equipments and trained IT staff. These are the resources that a hospital, supporting an in-house IT setup must utilize. They are costly.

This highly optimized software is maintained, updated and configured in the cloud by the skilled IT experts. The users are, thus, spared from the burden. It leads to cost saving. Unhindered, the hospital staff stays focused on the core functions of the hospital.

Harness it From Anywhere at Anytime

The hospital administrator acts as the super-user of the software. He or she, then, grant access permissions to the others. The managers, doctors and others can then access the necessary data stored in the cloud, from anywhere at anytime.

They can use smartphones, tablets, phablets, laptops, notebooks and desktops over the internet for the purpose.

Fast Service

This software gives fast, easy and simple solutions for the hospitals in managing their day-to-day activities. It helps in streamlining patient management, inventory management, employees’ and doctors’ attendance, online report generation and other tasks.

Sustainability

For hospitals using this software, it is easy to recover from an on-site disaster. Their data is stored in the cloud, where it remains safe. It is repeatedly backed up. They need to simply access it to get their system online.

Features of the Cloud Based Clinic Management System

1. Patient management: Maintains records of the patients that include personal details, visits to the hospitals, allergy related data, medication, etc.

2. Appointments and schedule management: Determines the availability of the doctors before scheduling appointments. Uses powerful search engine to set up an appointment for the patient. The software assists the staff in knowing the availability of the beds for the patient’s hospital stay.

3. Alerts: Sends alerts and reminders using SMSs and Emails. It notifies the patients about the future appointments and vaccination schedules.

4. Purchase and inventory management: Keeps track of the drugs, equipments, instruments and other hospital items in the stock. Generate expiry alerts for the drugs in stock. Assists in creating a purchase list.

5. Records: Stores all the electronic medical records of the patients and the data related to the hospital, in a central place. It is available to the authorized persons from anywhere, at any time. Doctors can use the patient data to conduct medical research.

6. Payment Processing: Assists the hospital’s accounting department in, accurate medical billing to the patient. Provides connectivity to the top accounting software and eases the tasks of accountants.

7. Lead Generation: It assists the business managers employed by the hospitals in lead generation and tracking.

It is easy to start using a cloud-based clinic management system software. It needs no installation and one can access and start using it over the internet, in a jiffy.

Posted in general | Comments Off on 7 Benefits of the Doctor and Clinic Management System Software